Welcome to Wuxi Hongye New Material Co., Ltd !
Tel : +86 180 1478 0128 Email：info@hongye-metal.com
1060 aluminum plate is widely used in products with low strength requirements.
Products are often used in signs billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
Products are often used in signs billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
Al-cu-mg-zn alloy, which is made by adding Zn on the basis of duralumin.
This kind of alloy is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum.
Disadvantage is also very poor corrosion resistance, can improve the artificial aging temperature or aluminum.
Super hard aluminum alloy with "aluminum chao" Chinese pinyin prefix "LC" plus serial number. Such as LC4, LC6, etc., are mostly used to manufacture important components with large stress, such as aircraft girders.
This kind of alloy is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum.
Disadvantage is also very poor corrosion resistance, can improve the artificial aging temperature or aluminum.
Super hard aluminum alloy with "aluminum chao" Chinese pinyin prefix "LC" plus serial number. Such as LC4, LC6, etc., are mostly used to manufacture important components with large stress, such as aircraft girders.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloyhas similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloyhas similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
6063 aluminum alloy material. The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
6063 aluminum alloy profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
6063 aluminum alloy profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
5052 aluminum sheets belong to Al-Mg aluminum alloy, where magnesium is the main element inside.
This kind of alloy is the most extensively used anti-rust aluminum and it has high strength, extraordinary fatigue resistance, excellent plasticity and corrosion resistance; it is non-heat treatable: it has high plasticity at annealed condition, good plasticity when semi-cold hardening, while low plasticity during cold hardening.
It can be polished and has good corrosion resistance, excellent weldability, but poor machinability.
5052 aluminum sheets have been certified by ASTM B209 and our production are all conducted according to international standards.
This kind of alloy is the most extensively used anti-rust aluminum and it has high strength, extraordinary fatigue resistance, excellent plasticity and corrosion resistance; it is non-heat treatable: it has high plasticity at annealed condition, good plasticity when semi-cold hardening, while low plasticity during cold hardening.
It can be polished and has good corrosion resistance, excellent weldability, but poor machinability.
5052 aluminum sheets have been certified by ASTM B209 and our production are all conducted according to international standards.
5052 represents the brand of the product, and the word "5" indicates that the modified product belongs to the aluminum-magnesium alloy product.
According to the chemical composition, it can be seen that the magnesium alloy content of the product is between 2.2-2.8%, and the density is 2.68.
Generally enterprises take the median value of 2.5% magnesium alloy content in the processing process, so this series of aluminum plate can become AlMG2.5.
According to the chemical composition, it can be seen that the magnesium alloy content of the product is between 2.2-2.8%, and the density is 2.68.
Generally enterprises take the median value of 2.5% magnesium alloy content in the processing process, so this series of aluminum plate can become AlMG2.5.
1050 aluminum platealso known as pure aluminum plate, is one of the types of aluminum plate with the most heavy aluminum content, and its purity can reach more than 99.00%.
Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap.
It is the most commonly used aluminum plate in conventional industry at present.
Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap.
It is the most commonly used aluminum plate in conventional industry at present.
7075-T6 aluminum alloy hardness is 150HB, belongs to the high hardness aluminum alloy.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
7075 aluminum heat treatment is because zinc is the main alloying element in 7075, adding magnesium to the alloy containing 3%-7.5% zinc can form a significant strengthening effect of MgZn2, so that the heat treatment effect of the alloy is far better than the al-zinc binary alloy; With the increase of zinc and magnesium content, the tensile strength of the alloy will be further improved, but its resistance to stress corrosion and spalling corrosion will decrease.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
7075 aluminum heat treatment is because zinc is the main alloying element in 7075, adding magnesium to the alloy containing 3%-7.5% zinc can form a significant strengthening effect of MgZn2, so that the heat treatment effect of the alloy is far better than the al-zinc binary alloy; With the increase of zinc and magnesium content, the tensile strength of the alloy will be further improved, but its resistance to stress corrosion and spalling corrosion will decrease.
CONTACT US
PROVIDE YOU WITH FREE SOLUTIONS
